Operation; Menu Structure - EuroLite LED Mega Strobe 812 Panel Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation.
The display indicates the last operating mode. The operating modes can be selected by means of the display
and the control buttons. All settings remain stored even if the device is disconnected from the mains. The
device can be operated in stand-alone mode via the control board or in DMX-controlled mode via any
commercial DMX controller.

Menu structure

Address
Channel
DMX Monitor
Auto
Speed
Effect on Auto
Mas Mode
Manual
Back Light
(Display shutoff time)
Temp
Info
Dimmer curve
Fade time
Display
001-512
6, 17, 20, 21, 298, 310
CH:6
CH:17
CH:20
The DMX values for each channel can be read out via the
CH:21
CH:298
CH:310
Auto 00 ~ Auto 36
000 - 255
Dimmer RGB 000 - 255
Strobe 000 - 255
Yes
Master - Slave
No
White 000 - 255
Blue 000 - 255
Green 000 - 255
Red 000 - 255
Strobe 000 - 255
Dimmer 000 - 255
On
60s
120s
300s
Temp 1 xxC°
Temp 2 xxC°
Test 1
Test 2
Version
Curve 0 Linear
Curve 1 S-curve
Curve 2 Square
Curve 3 InvSquare
Speed 0 ~ Speed 7
31/44
Function
DMX address setting
Setting DMX channel mode
monitor.
37 auto programs
Program running speed
slow > fast
Brightness dark > bright
Strobe effect slow > fast
Master/Slave function on
Master/Slave function off
Intensity 0 – 100 %
Intensity 0 – 100 %
Intensity 0 – 100 %
Intensity 0 – 100 %
Strobe-Effect slow > fast
Brightness dark > bright
Constantly on
Off after 60 seconds
Off after 120 seconds
Off after 300 seconds
Temperature of the LCD panel
Inside temperature
Test mode without flash
Test mode with flash
Current software version
Dimmer curves
Fade fast > slow
00140086, Version 1.0