Declaration Of Conformity; Important Safety Instructions - Makita AC001G Betriebsanleitung

Guaranteed sound power level according
to EU Outdoor Noise Directive.
Guaranteed sound power level according
to UKCA Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
Noise
The typical A-weighted noise level determined accord-
ing to EN ISO 3744: 2010:
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).

Declaration of Conformity

For European countries only
The declaration of conformity is included as Annex A to
this instruction manual.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE
INSTRUCTIONS.
WARNING:
• IMPROPER OPERATION OR MAINTENANCE
OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE.
• READ AND UNDERSTAND ALL WARNINGS
AND OPERATING INSTRUCTIONS BEFORE
USING THIS EQUIPMENT.
) : 68 dB (A)
pA
• Keep this instruction manual for your refer-
ence and instructions for others. When you
lend the compressor and air tools, lend only
to people who have proven to be experienced
and also hand over the instruction manual
together.
First-time or inexperienced operators should
•
be trained in the operations. Never allow
children, or people unfamiliar with the instruc-
tions, to use the compressor and air tools.
WARNING:
Work Area Safety
• Keep your work area clean and well lit.
Cluttered and dark areas invite accidents.
• Do not operate the compressor in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases, or dust. The compressor
creates sparks which may ignite the dust or
fumes.
• Keep bystanders, children, and visitors away
while operating an air tool. Distractions can
cause you to lose control. Protect others in
the work area from debris such as chips and
sparks. Provide barriers or shields as needed.
Children should never be allowed in the work
area.
• The adequate room temperature is +5°C to
+30°C. (0°C to + 40°C at Maximum)
WARNING:
Risk of Unsafe Operation
WHAT CAN HAPPEN
Unsafe operation of your air compressor could lead to
serious injury to you or others.
HOW TO PREVENT IT
• Review and understand all instructions and warn-
ings in this manual.
• Become familiar with the operation and controls of
the air compressor.
• Keep operating area clear of all persons, pets, and
obstacles.
• Keep children away from the air compressor at all
times.
• Do not operate the product when fatigued or under
the influence of alcohol or drugs. Stay alert at all
times. Distractions can cause you to lose control.
• Never defeat the safety features of this product.
• Equip area of operation with a fire extinguisher.
• Do not operate machine with missing, broken, or
unauthorized parts.
• Before use, always check that the compressor is
safe for operation. If there is a misalignment or
binding of moving parts, breakage of part, or other
functional failure, have the compressor serviced
before use. Many accidents are caused by poorly
maintained products.
4 ENGLISH