Makita AC001G Betriebsanleitung Seite 13

Recommended interval of inspection and maintenance
Inspect and maintain the compressor within the period as described in the following table.
Part
Overall Inspect for unusual
noise and vibration
Clean off dirt and
dust with dry air.
Air lines and fittings Inspect for leakage
Air tank Exhaust all air and
drain condensation
in the air tank. (open
the drain valve.)
Inspect for
scratches, dents, or
leakage.
Inspect rust, pin
holes, or other
imperfections that
could cause it to
become unsafe.
Bolts and nuts Inspect for
tightness.
Handle Wipe off oil and
grease.
Cut-out pressure Check and adjust.
Air filter Clean or replace if
necessary.
Lubrication
This air compressor is equipped with an Oil-Less pump
designed for durability and no maintenance.
Storage
Before you store the air compressor, make sure you do
the following:
• Review the "MAINTENANCE" and "OPEATION"
sections and perform maintenance as necessary.
Be sure to drain water from the air tank.
• Protect the air hose from damage (such as being
stepped on or run over).
Store the air compressor in a clean and dry location.
Action Daily
(before/after use)
-
-
-
-
-
-
Weekly
-
-
-
-
-
-
13 ENGLISH
Monthly Quarterly
- -
- -
- -
- -
- -
-
- -
- -
- -
-