Instruction Manual - Makita AC001G Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
L/min @ 0.62 MPa
(L/min @ 6.2 bar)
Cut-In Pressure
Cut-Out Pressure
Outlet Max Pressure
Bore x Stroke x Qty
Motor RPM
Tank Size
Lubrication
Rated voltage
Dimensions (L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the Makita battery cartridges and chargers listed above. Use of any other battery
cartridges and chargers may cause injury and/or fire.
NOTE: The battery cartridge and charger are not included.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Take particular care and attention.
Risk of electric shock.
Caution: before doing any work on the
compressor the battery cartridge must be
removed.
Risk of high temperatures.
Caution: the compressor contains some
parts which might reach high temperatures.
Risk of accidental start-up.
Attention, the compressor could start
automatically in case of a black-out and
subsequent reset.
Wear safety glasses.
36 mm x 30 mm x 1
D.C. 36 V - 40 V max
302 mm x 434 mm x 382 mm
BL4020 / BL4025 / BL4040* / BL4050F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
Wear ear protection.
For European countries only
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
3 ENGLISH
AC001G
34 L/min
0.72 MPa (7.2 bar)
0.93 MPa (9.3 bar)
0.93 MPa (9.3 bar)
-1
6,000 min
7.6 L
Oil-Less
11.6 - 12.2 kg