Warranty In Case Of Installation & Preparing - Paramondo 2000 Montageanleitung

28
Warranty in case of installation & Preparing
Instructions for the installation of awnings and the exclusion of warranty in case of installation on unsui-
table surfaces and in case of improper installation:
The awnings can basically be installed in three ways:
• Installation on a wall - lateral assembly
• Installation on a ceiling
• Installation on a wall - rear assembly
These basic types of installation can be considered as direct or at least close to a fixed structure capable of protecting
the awnings against strong wind and/or bad weather.
We assume the legal warranty for any defects in our awnings only for awnings that have been professionally installed
on one of the above-mentioned surfaces in accordance with the above statements. DIN EN 13561 applies.
We expressly exclude the statutory warranty for awnings which, contrary to the above, have not been mounted on
one of the above-mentioned bases, e.g. wooden or steel scaffolding, fences etc.
We also expressly exclude the statutory warranty for awnings that have not been installed properly and professional-
ly.
Preparing
For the assembly of the awning, depending on the size, at least 2 people are required.
The fitting time for the awning is about 2 hours.
1. Unpack the awning and its assembly material.
2. Check the package contents according to the scope of delivery and read the safety instructions completely.
3. Make sure to have a free, safe and dry working area.
4. Remove all transport security fastenings.
5. Make sure to have ready all necessary items, tools and the assembly material.
6. Make sure that the ceiling and ground, to which the awning will be fixed, are suitable for installation. The manufacturer does
not accept any liability of weak or damaged mounting surfaces.
7. Do not change under any circumstance the construction of the awning. The manufacturer will not provide any warranty
regarding changes in the construction of the awning.
www.paramondo.de