Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty In Case Of Installation & Preparing - Paramondo LINE Montageanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Instructions for the installation of awnings and the exclusion of warranty in case of installation on
unsuitable surfaces and in case of improper installation:
The awnings can basically be installed in three ways:
• Installation on a wall e.g. house wall
• Installation on a ceiling e.g. under a balcony
• Installation on rafters
These basic types of installation can be considered as direct or at least close to a fixed structure capable of protecting
the awnings against strong wind and/or bad weather.
We assume the legal warranty for any defects in our awnings only for awnings that have been professionally installed
on one of the above-mentioned surfaces in accordance with the above statements. DIN EN 13561 applies.
We expressly exclude the statutory warranty for awnings which, contrary to the above, have not been mounted on
one of the above-mentioned bases, e.g. wooden or steel scaffolding, fences etc.
We also expressly exclude the statutory warranty for awnings that have not been installed properly and
professionally.
Preparing
For the assembly of the awning, depending on the size, at least 2 people are required.
From a width of 500 cm, we recommend 4 people for the assembly of the awning.
The fitting time for the awning is about 2 hours.
1. Remove the marquee and the fitting material from the packaging.
2. When unpacking, note that the articulated brackets are under tension and may fold out.
3. Check whether the package contents are complete and look for any damage.
• Do not install the marquee if parts are missing or damaged.
• It is not possible to submit a complaint regarding damage or missing parts after installation.
4. Store the marquee on a stable surface (mounting blocks, workbench, floor).
5. Remove all transport safety devices.
6. Keep all the necessary tools and installation materials accessible.
7. Make sure that the wall you want to fit the marquee to is suitable for fitting.
• The manufacturer does not assume any liability for fitting bases that are too weak or damaged.
8. Never make any changes to the marquee construction.
• The manufacturer does not assume any liability in case of changes to the marquee construction.
Warranty in case of assembly & Preparing
www.paramondo.de
57

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis