Autel Robotics EVO II PRO V3 Schnellstartanleitung Seite 34

9.PREPARING THE CONTROLLER
(1)
The sticks storage slots are located
on the back of the controller. Please
take out the sticks and screw them
into the corresponding bases.
(2)
Unfold the antennas. When the antenna and the back of the controller
are at an angle of 180° or 270°, and the antenna surface is facing
the aircraft, the signal quality between aircraft and controller will
reach the optimal condition.
10. POWERING UP
(1)
Press and hold the power button for
2 seconds to turn on the controller.
180
o
270
o
33