Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Repeatedly touch the timer button TIMER to select the weekday you want to preview.
3. Repeatedly touch the program button PROG to run through the programmable periods and associated start and
end times.
10.7.3 Updating custom programs
You can update a program without affecting existing settings.
1. Repeatedly touch the mode selection button MODE until UP shows on the display.
2. Touch the program button PROG to enter the programming mode.
à
d1 flashes on the display.
3. Repeatedly touch the timer button TIMER to select the weekday you want to update.
4. Touch the menu button UP to enter the first programmable period.
à
The display shows 1. and the symbol HOT flashes on the display.
5. Use the menu buttons UP and DOWN to set the start time. Touch the button TIMER to save the time setting.
6. Use the menu buttons UP and DOWN to set the end time. Touch the button TIMER to save the time setting.
à
The display shows 2. and the symbol HOT flashes on the display.
7. Continue programming the second (2.) and third (3.) period in the same way.
10.7.4 Activating custom programs
You may be using the heater in different modes on different weekdays. Once you have programmed a custom pro-
gram it is stored in memory and you can activate the program at any time.
Preconditions:
a
The heater is operating.
1. Repeatedly touch the mode selection button MODE until UP shows on the display.
à
The heater operates in custom mode (custom program) until you change modes or switch the heater off.
10.8 Sensing open windows
If the open window sensing mode is activated, the heater will sense open windows and stop heating. An open win-
dow is defined as a temperature drop of 5 °C or more over a period of 30 minutes.
10.8.1 Activating the window sensing mode
Preconditions:
a
The heater is operating.
1. Touch the button WINDOW.
à
The symbol WINDOW flashes on the display.
à
If an open window is sensed, the heater stops heating.
10.8.2 Resetting the window sensing mode
To continue heating after an open window was sensed you need to reset the open window mode.
1. Close the window.
2. Touch the button WINDOW.
à
The symbol WINDOW flashes on the display.
à
You have reset the open window sensing mode. The mode is activated again.
35
Werbung
Inhaltsverzeichnis
