Setting Room Temperature; Manual Mode; Setting Countdown Timers - Sygonix 2525293 Bedienungsanleitung

7. Touch the timer button TIMER to save the setting.
à
The display returns to normal operation.

10.4 Setting room temperature

The heater can maintain a room temperature between +5 to +35 °C with the support of two heating power settings
(1000/2000 W). Set a temperature that suits your needs. If the set temperature is reached, the heater will stop heat-
ing. The display shows the temperature measured by the built-in temperature sensor and might deviate slightly from
the actual room temperature.
Preconditions:
a
The heater is operating.
a
The heater is not operating in the anti-frost working mode (the display shows the symbol FROST).
1. Use the menu buttons UP and DOWN to set the desired room temperature.
à
The setting will be saved automatically after 5 seconds from the last input and the display shows the current
room temperature.
2. Use the heating power button POWER to select a heating power.
à
As soon as the set temperature is reached, the heater will stop heating.
à
If the temperature falls below the set temperature by 1 °C the heater starts heating again.

10.5 Manual mode

With the manual mode, you are in charge of setting room temperature and heating power. In manual mode you can
also set countdown timers.
Preconditions:
a
The heater is operating.
1. Repeatedly touch the mode selection button MODE until P1 shows on the display.
2. Set temperature and heating power. For details, see

10.5.1 Setting countdown timers

Set a countdown timer to turn the heater off after the set time has elapsed.
Setting timers
Note:
You can only set hourly timers.
Preconditions:
a
The heater operates in manual mode.
1. Quickly touch the timer button TIMER two times (2x) to activate the timer mode.
à
The symbol TIMER and the countdown time flash on the display.
2. Use the menu buttons UP and DOWN to set the desired operating hours.
à
The setting will be saved automatically after 5 seconds from the last input and the timer starts counting down.
à
The symbol TIMER shows on the display until the countdown time has elapsed.
à
The heater switches off after the countdown time has elapsed.
32
Setting room temperature [} 32].