Setting Room Temperature; Manual Mode; Setting Countdown Timers - Sygonix 2525295 Bedienungsanleitung

1. Touch and hold the timer button TIMER for 3 seconds to enter the day and time setting mode.
à
One of the weekday symbols [M], ..., [S] flashes on the display.
2. Use the menu buttons UP and DOWN to select the current weekday. Observe the corresponding weekday sym-
bol on the display.
3. Touch the timer button TIMER to save the setting.
à
The hours flash on the display.
4. Use the menu buttons UP and DOWN to select the hours of the current time.
5. Touch the timer button TIMER to save the setting.
à
The minutes flash on the display.
6. Use the menu buttons UP and DOWN to select the minutes of the current time.
7. Touch the timer button TIMER to save the setting.
à
The display returns to normal operation.

11.4 Setting room temperature

The heater can maintain a room temperature between +5 to +35 °C with the support of two heating power settings
(1000/2000 W). Set a temperature that suits your needs. If the set temperature is reached, the heater will stop heat-
ing. The display shows the temperature measured by the built-in temperature sensor and might deviate slightly from
the actual room temperature.
Preconditions:
a
The heater is operating.
1. Use the menu buttons UP and DOWN to set the desired room temperature.
à
The setting will be saved automatically after 5 seconds from the last input and the display shows the current
room temperature.
2. Use the heating power button POWER to select a heating power.
à
As soon as the set temperature is reached, the heater will stop heating.

11.5 Manual mode

With the manual mode, you are in charge of setting room temperature and heating power. In manual mode you can
also set countdown timers.
Preconditions:
a
The heater is operating.
1. Repeatedly touch the mode selection button MODE until the symbol POWER shows on the display and the sym-
bol PROG does NOT show on the display.
2. Set temperature and heating power. For details, see
à
The heater operates in manual mode until you change the mode or switch the heater off.

11.5.1 Setting countdown timers

Set a countdown timer to turn the heater off after the set time has elapsed.
Setting timers
Note:
You can only set hourly timers.
Setting room temperature [} 33].
33