Safety Instructions - Becker Centronic TimeControl TC42 Bedienungsanleitung

Operating Instructions
Warning
• Risk of injury through an electric shock.
• Terminal connections to a 230 V network must be carried out by an authorised
electrician.
• Before assembly, disconnect the power lead from the supply.
• The provisions of the local public utilities and stipulations for wet and damp
rooms in accordance with VDE 100 are to be observed when the system is
connected.
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the systems guide track.
• Keep away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly.
Replace batteries with an identical type (CR 2032) only.
• If the system is controlled by one or several devices, the system guide track
must be visible during operation.
• Only types of cable with sufficient electric strength can be used for connecting
control cables (protective low voltages).
• The equipment contains small parts that could be swallowed.

Safety instructions

27