Residual Risks; Handling And Transport; Handling Of Packaging; Unpacking - Ferroli EGEA 90 LT Handbuch Für Betrieb Und Installation

3.8

RESIDUAL RISKS

The design was carried out in order to ensure the essential
safety requirements for the operator in charge and for the end
user.
As far as possible, safety has been integrated into the design
and construction of the device; however, there are still risks
from which operators must be protected.
Risk Definition
RISK DUE TO ELECTRICITY.
Machine access and maintenance op-
erations expose operators to risk due to
ELECTRICAL
electricity.
HAZARD
Work on live equipment must only be
carried out by expert and qualified per-
sonnel. The following safety measures
are recommended:
• do not carry out maintenance work
without having previously discon-
nected the device from electricity;
• carry out the operations only if in
safe conditions according to that
described in this manual; in case of
doubt, contact the Manufacturer.
RISK OF GAS LEAKS.
The machine must have ducts to allow
any refrigerant gas leaks to escape into
DANGER
the external environment.
128
EN
4.

HANDLING AND TRANSPORT

4.1

HANDLING OF PACKAGING

The device comes in a cardboard box on a wooden pallet.
The type of packaging may vary at the discretion of the man-
ufacturer.
For unloading operations, use a forklift truck or transpallet:
these should have a capacity of at least 250 kg.
4.2

UNPACKING

ATTENTION
Unpacking must done carefully in order not to damage the de-
vice casing if using knives or cutters to open the cardboard
packaging.
After removing the packaging, check the integrity of the unit. In
case of doubt, do not use the device and contact an authorised
technician.
Before eliminating the packaging in accordance with current
environmental protection laws, make sure that all the accesso-
ries supplied have been removed from it.
cod. 3541T580 - Rev. 07 - 12/2022
EGEA
90 LT - 120 LT
The packaged device
must be kept upright
during all loading op-
erations.
fig. 19
The packaging material (staples,
boxes, etc.) must not left with-
in the reach of children as they
pose a risk to them.
RECYCLING / DISPOSAL.
All packaging materials must be
disposed of in accordance with
the laws in force in the country
of use.