Identification Plates Of The Main Elements; Description Of The Symbols Used In The Manual And On The Packaging - Ferroli EGEA 90 LT Handbuch Für Betrieb Und Installation

Do not tamper with the data plate
in any way.
ATTENTION
In the event of a request for information or technical assis-
tance, it is necessary to specify, in addition to the model and
type of machine, also the relative serial number.
3.2 IDENTIFICATION PLATES OF THE MAIN
ELEMENTS
The labels of all components not built directly by
FERROLI S.p.A. are directly applied to the components them-
selves, in the points where the respective manufacturers orig-
inally placed them.
3.3 DESCRIPTION OF THE SYMBOLS USED IN
THE MANUAL AND ON THE PACKAGING
The symbols shown in the following table can be used in whole
or in part in this manual and accompanied by their description.
Some of these may be affixed to the device and/or its packag-
ing.
Symbol Definition
SYMBOLS USED IN THE MANUAL
RISK OF ELECTROCUTION.
Any intervention that involves the removal of
covers or panels on which this symbol is af-
ATTENTION
fixed must be carried out exclusively by quali-
DANGER
fied technicians.
GENERIC DANGER.
Symbol used to identify important warnings for
the safety of the operator and/or the device.
ATTENTION
REFRIGERANT GAS R290
The device is equipped with R290 refrigerant
gas; strictly follow the warnings where this
R290
symbol is shown.
GENERIC OBLIGATION.
Symbol used to identify information of particu-
lar importance.
OBLIGATION
OBLIGATION.
Symbol used to identify the specific obligation
of grounding connection.
OBLIGATION
126
EN
Symbol
OBLIGATION
PROHIBITION
2x
cod. 3541T580 - Rev. 07 - 12/2022
EGEA
Definition
OBLIGATION.
Symbol used to identify the obligation to read
this instruction manual before any type of in-
tervention on the device.
GENERIC PROHIBITION.
Symbol used to identify the prohibition of the
prescribed description.
WEIGHT.
Symbol that identifies the weight of the ma-
chine. If present on the packaging, it indicates
the weight of each package.
RECYCLING / DISPOSAL.
Symbol that identifies the recovery and recy-
cling of materials.
PROFESSIONAL WASTE
Indicates that this product must not be treated
as household waste but must be delivered to
the appropriate collection point for the recy-
cling of electrical and electronic equipment
(DIRECTIVE 2012/19/EU)
VISUAL INSPECTION
Symbol that identifies visual inspection.
MANUAL CLEANING
Symbol that identifies manual cleaning.
MINIMUM NUMBER OF OPERATORS
EMPLOYED
Operations that must be carried out by at least
two people.
SYMBOLS USED ON THE PACKAGING
POSITIONING DIRECTION
Affixed to the packaging, it indicates the
correct orientation.
PROTECTION FROM WEATHER
CONDITIONS
Affixed to the packaging, it indicates to
protect from rain and atmospheric agents.
Store in a dry place.
FRAGILE
Affixed to the packaging, it indicates to handle
it with care in order to avoid any breakage of
the contents.
90 LT - 120 LT