LaserLiner MultiWet-Finder Plus Bedienungsanleitung Seite 24

!
Make sure that the wireless interface of the mobile device is activated.
After starting the app and activating the digital connection, a connection
can be set up between a mobile device and the measuring device.If the
app detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time it is
switched on.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for longer
periods. Store the device in a clean and dry place.
Calibration
The measuring device must be calibrated and tested on a regular basis
to ensure it is accurate and working properly. We recommend carrying
out calibration once a year. Contact your distributor or the
UMAREX-LASERLINER service department.
Technical data (Subject to technical changes without notice. 22W50)
Measured variables
Mode
Functions
Measurement range
Accuracy
24
EN
Moisture content of material (capacitive)
Humidity
Ambient temperature
Dew point temperature
Index
Building materials
Reference
Automatic shutdown
HOLD
MAX
Ambient temperature: -10°C ... 60°C
Humidity (relative): 20% ... 90%
Ambient temperature: ± 1°C
Humidity (absolute): 20% ... 80% (± 3%)
Humidity (relative): <20% and >80% (± 5%)