General Safety Instructions - LaserLiner MultiWet-Finder Plus Bedienungsanleitung

The operating principle of the device can only determine the material
!
moisture measurement in % and show the moisture content on the
LED display when the material matches the specified internal material
characteristics.

General safety instructions

– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
– The measuring ball head must not be operated under external voltage.
– Please ensure compliance with the safety regulations set out by local
and national authorities with regard to the correct and proper use
of the device.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface. The measuring
device complies with electromagnetic compatibility and wireless radiation
regulations and limits in accordance with the RED 2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the MultiWet-Finder Plus radio
equipment complies with the essential requirements and other
provisions of the European Radio Equipment Directive 2014/53/EU (RED).
The EU Declaration of Conformity can be found in its entirety at the following
address: https://packd.li/ll/akx/ce
MultiWet-Finder Plus
15
EN