Ego Power+ ZT4200E-S Originalanleitung Seite 40

EN
LCD
Description
Display
The icons of each
occupied battery
compartment, low power
indicator, and fuel gauge
blink every 1 second at
the same time on the LCD
screen. The first LED fuel-
gauge & mower status
indicator blinks too.
The icon of each occupied
battery compartment
and low power indicator
blink every half a second,
the first LED fuel-gauge
will flash red every half a
second too.
The auto-parking icon
blinks on the LCD.
Brake pedal icon shows on
the LCD
40
ZERO TURN RIDE-ON MOWER — ZT4200E-S
Fault
Mower
Code
Status Beeper
on
Indicator
LCD
Keeps
beeping
Flashes until the
n/a
red PTO switch
is pushed
downward.
Flashes Keeps
n/a
red beeping
Keeps
n/a OFF
beeping
n/a OFF No
Cause Solution
Stop working and return
to the battery charging
area.
NOTE: When the mower
is in Limp-Home
mode, the blades are
automatically switched
The battery packs
into low rotation speed
are low on charge
8and meanwhile
and the mower
the audio indicator
is in Limp Home
will keep beeping.
mode.
The operator should
push the PTO switch
downward to turn off
the blade motors. The
audio indicator will stop
beeping after the blades
stop.
The mower will stop
working immediately.
The battery
The operator should
parks are nearly
transport the mower
depleted.
to the battery charging
area for charging.
The mower is
parked on a slope Set the brake pedal at
and the operator the braking position.
leaves the mower The auto-parking icon
without setting will turn off and the
the parking-brake sound indicator will
pedal at the stop beeping.
braking position.
The parking brake
Release it before
pedal is set at the
starting the mower.
braking position.