Ego Power+ ZT4200E-S Originalanleitung Seite 26

EN
WARNING: Be aware of what is behind the mower
before backing up. DO NOT mow in reverse unless
absolutely necessary. Always look down and behind
before and while backing to make sure no children,
bystanders, or pets enter the mowing area. Remember
that a careless fraction of a second is sufficient to inflict
death or serious injury.
WARNING: Do not operate this machine on public
roadways.
WARNING: If blockage happens or you strike a
foreign object, stop the motors and remove the batteries.
Remove grass clippings, leaves, dirt and any other
accumulated debris; thoroughly inspect the mower for
damage and repair the damage before restarting and
operating the mower.
USING CRUISE CONTROL (CCS)
To activate CCS during driving (Fig. E22)
NOTE: The driving speed level shown on the LCD screen
may not accurately represent the actual driving speed
of the mower in cruise control. Press one of the speed
adjustment buttons (" " or " ") to "refresh" and adjust
the driving speed level on the LCD screen.
To exit CCS and stop the mower, you may choose one
of the four ways:
◾
Slightly depress the accelerator pedal and then
release it.
◾
Pull left/right paddle(s) toward the operator and then
release.
◾
Depress the parking brake pedal. The mower will
stop.
◾
Press the CCS button.
NOTE: Depress the accelerator pedal all the way
to achieve the current CCS driving speed and keep
depressing. The CCS function will stop and the mower
will continue driving at the current speed.
26
ZERO TURN RIDE-ON MOWER — ZT4200E-S
MAINTENANCE
WARNING: Always wear eye protection with side
shields. Failure to do so could result in objects being
thrown into your eyes resulting in possible serious injury.
WARNING: Always protect your hands by wearing
heavy gloves or wrapping the cutting edges with rags
or other materials when performing any maintenance
on the mower blade. Always remove the safety key and
battery packs when servicing or transporting the mower.
Maintenance
Maintenance Procedure
Service Interval
◾
Check the safety-interlock
system.
◾
Visually check the tires whether
they are inflated.
◾
Inspect the blades.
◾
Inspect the entire product for
damaged, missing, or loose parts
such as side discharge chute,
Before each use
screws, nuts, bolts, caps, etc.,
or daily
ensuring that all guards are in
place and working properly.
◾
Check and make sure the
accelerator pedal could be
depressed and release properly.
◾
Check the steering wheel
damper. The steering wheel
should be rotated with certain
resistance.
◾
Clean the mower deck.
After each use
◾
Check the tire pressure.
Every 25 hours
◾
Check the rear wheels, ensuring
that the all lug nuts are fastened
Every 100 hours
at the recommended torque.
◾
Check the front wheels, ensuring
Every 200 hours
that they turn freely.