Ego Power+ ZT4200E-S Originalanleitung Seite 31

PROBLEM CAUSE
◾
The combined Ah of the
inserted batteries does not
meet the requirement.
◾
The PTO switch was not
pushed down when the
mower was turned off last
time.
The zero turn ride-on
◾
The mower is overloaded at
mower fails to start the
the moment the blades are
blades when the PTO
starting to rotate, triggering
switch is activated.
the motor self-protection.
PTO Switch icon blinks
◾
Under extreme cold weather,
the blade motor may not
start successfully due to the
low temperature protection.
◾
The blade interferes with the
deformed mower deck
◾
The mower is driving at
"TRAVEL" speed.
SOLUTION
◾
In order to start this mower, use enough EGO
batteries following the instructions in section
"ATTACHING/DETACHING THE BATTERY PACK" in
this manual.
◾
Push the PTO switch down and then up to restart the
blade motors.
◾
Start the mower grass cutting in lower blade speed
first and do not accelerate the blade speed until the
blades are rotating successfully.
◾
Always store the mower and battery in warm
environment. Restart the mower when it is warmed
up. Please do not make repeated attempts under
extreme cold weather which may damage the
machine.
◾
Call EGO Customer Service Center.
◾
When the mower is driving at "TRAVEL" speed, the
blade motors will automatically stop.
ZERO TURN RIDE-ON MOWER — ZT4200E-S
EN
31