Ego Power+ ZT4200E-S Originalanleitung Seite 32

EN
PROBLEM
The blades stop
working during grass
cutting.
The audio indicator
continues sounding.
32
ZERO TURN RIDE-ON MOWER — ZT4200E-S
CAUSE
◾
The mower is overloaded.
◾
The mower deck is clogged
with grass and debris.
◾
The mower is overheated.
◾
The battery pack(s) in
the mower's battery
compartment is overheated,
resulting in combined Ah
rating of all inserted batteries
to not meet the requirement.
◾
The mower is in Limp-Home
mode.
◾
The mower is hit by a foreign
object, resulting in motor
self-protection.
◾
The mower speed is adjusted
into "TRAVEL" mode.
◾
The mower is in Limp-home
mode and the blades are not
turned off.
◾
The mower stops driving on
a slope and the operator is
off the seat without setting
the parking-brake pedal at
the braking position.
SOLUTION
◾
Raise the deck cutting height or slow down the
driving speed to reduce the load of the mower.
◾
Clean the mower deck and make certain that the
blades have freedom of movement.
◾
Reduce the load of the mower, by raising the deck
cutting height or slowing down the blade/driving
speed and allow the mower to cool.
1. The mower can continue working if the combined
battery Ah rating, overheated battery excluded,
meets the requirement. Once the overheated
battery returns to normal temperature, it will join in
powering the mower immediately.
2. If the combined battery Ah rating does not meet
the requirement, the mower will not work until
more battery packs are inserted into the vacant
battery compartments.
3. Reduce the load of the mower by raising the deck
cutting height or slowing down the mowing when
resuming operation.
◾
When the mower is in Limp - Home mode, the
blades are automatically switched into low rotation
speed. The operator should stop working and drive to
the battery charging area as soon as possible.
◾
Push the PTO switch down and then up to restart the
blade motors.
◾
When the mower speed is in "TRAVEL" mode, the
blade motors will automatically stop.
◾
Push the PTO switch down to turn off the blade
motors. The audio indicator will stop sounding when
the blade motors are turned off.
◾
Set the parking-brake pedal in the braking position
before leaving the mower on the slope.