Bullerjan Free Flow FF18 03 Aufbau- Und Bedienungsanleitung Seite 16

Thank you for deciding to purchase a Bullerjan
FF18 stove. You have chosen a stove of the highest quality
with cutting-edge incineration technology and very high
heating efficiency.
Please register your product at our website, you can
thereby extend the warranty to 5 years (cg. warranty terms
on www.bullerjan.com).
Before you begin operation of the Bullerjan Free Flow, we would
like to give you some important information first and foremost:
Please note the following:
Carefully read this manual before initial use. It
includes important information for the installation,
operation and secure use of your Bullerjan
Flow. If you still have questions, please contact
your specialised retailer or the Bullerjan GmbH
directly.
Before installing your stove, ensure that the load
carrying capacity of the installation location is
sufficient for the weight of the stove including the
base and combustion wood.
If necessary, there must be weight adjustment
using a shim.
The Bullerjan GmbH points out that it is not
permitted to burn waste, combustible fluids or
non-suitable fuels to heat the stove.
The Bullerjan FF18- stove is an intermittent
burning appliance. This means as per definition
according to EN 13240: An intermittent burning
appliance is a heat source which is not beeing
used for permanent operation.
Note: venting devices or facilities that are
operated together with burning appliances in the
same room can cause problems with the
operation of the stove. Please ask your chimney
sweep.
Before beginning operation on your stove, please
note the national and European standards as well
as the valid, local regulations of your region. Ask
your chimney sweep who provides this
Free information.
®
Bullerjan stoves FF18 are coated with high-
®
quality, heat-resistant paint. This paint only
hardens completely during the initial heating of
the stove.
Bullerjan GmbH points out that no waste etc.,
flammable liquids or unsuitable fuels may be used
to heat the fireplace. For a listing of the usable
fuels please refer to the further information in this
manual.
As a result, during the initial heating of the stove,
there will be some smoke formation and odour.
Therefore, when initially heating, open the doors
and windows.
Firing installations require a regular inspection by
a specialist. This is your professional chimney
sweep or your Bullerjan
13
Free Flow
®
specialised retailer.
®
English