Wired Connection Switch To Wi-Fi Connection - ieGeek IE20 Bedienungsanleitung

Wired Connection Switch to Wi-Fi Connection

1. Please follow the steps above to connect the camera to the APP.
2. Enter "Wireless setting" - "Get the wireless network around the device" to
choose the Wi-Fi you want to connect. After you enter your Wi-Fi password, it
will say "Wireless setup successfully".
3. Waiting 60 seconds as this camera needs to reboot and you can't tell any
changes during the reboot.
4. Then the camera will show online.
5. Unplugged the Ethernet cable.
6. Waiting for about two minutes to reboot the camera and restart your APP.
5