Pc Client Setting; Introduction Of Hip2P Interface; How To Connect The Camera - ieGeek IE20 Bedienungsanleitung

PC Client Setting

If you need more detailed instructions in PC client, please contact our after-sales
service directly: service@iegeek.com.
Please download and install 'HiP2P' in PC client via the following link: http://
www.iegeek.com HiP2P Client.exe will appear in your desktop after installed
successful. HiP2P supports IOS and Windows.
There is no password when you log in the HiP2P at the first time.
A� Introduction of HiP2P interface
1. Preview: preview online cameras.
2. Automatically add devices: add devices under the same router automatically.
3. Local playback: view the downloaded videos and videos stored in hard disks.
4. Remote playback: view the videos stored in SD card.
5. Config: set the camera settings such as add the camera, server address and
snapshots, etc.
6. Logs: you can check the camera active in here.
7. Log out user: log out the current user.
8. Exit.
B� How to connect the camera
1. Click "config".
2. Click "device management".
3. Click "input UID".
12