Parameter Settings; Record Management; Alarm Management; User Management - ieGeek IE20 Bedienungsanleitung

C� Parameter settings
1. Video: set bit rate, frame rate, stream etc.
2. Image: set IR LED, image mode etc.
3. Audio: the input&output voice. (Just can set the two-way audio cameras.)
4. Alarm setting: including motion detection, sound alarm, email alarm, FTP
storage etc.
5. Network: get the IP address, RTSP port and ONVIF port of the camera.
6. SD card: check your micro SD card storage and set the plan recording time.
(The green areas are the working time.)
7. Timed capture: save pictures to micro SD card or RTSP.
8. Login information: change the camera password.
9. System: view the camera information and set the time zone.
10. Wi-Fi: connect the camera to Wi-Fi and test the Wi-Fi signal.
11. Motion detection: set the detection zones and sensitivity.
D� Record management
Including general record length, alarm duration time, record format etc. (The
videos saved in the TRecord file are the real-time videos. The camera will save
real-time video to TReord file automatically after you open HiP2P.)
E� Alarm management
Set alarm working time.
F� User management
Add, modify or delete user account.
14