Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Safety
Ingress protection:
IP65 per lEC/EN 60529
For further specifications, see WIKA data sheet PM 01.18 and order documentation as well
as chapter 9 "Specifications".
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.
Any operation of the instruments deviating from the above provisions must be clearly
discussed, tested and approved in advance in detail with the responsible technical depart-
ment of the manufacturer.
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and injuries.
▶
Refrain from unauthorised modifications to the instrument.
▶
Do not use the instrument within hazardous areas.
▶
Do not use the instrument with abrasive or viscous media.
▶
The blow-out device must not be blocked.
Any use beyond or different to the intended use is considered as improper use.
3.4 Responsibility of the operator
The instrument should only be used in industrial applications. The operator is therefore
responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the safety, accident
prevention and environmental protection regulations for the application area must be
maintained.
To ensure safe working on the instrument, the operating company must ensure the following:
First aiders and first-aid equipment must be available at all times in case they are
■
needed.
The operating personnel must be regularly instructed in all topics regarding work safety,
■
first aid and environmental protection. Ensure that the operating instructions and, in
particular, the safety instructions contained therein are known.
The suitability of the instrument in accordance with its intended use must be tested for
■
the particular application.
Personal protective equipment must be provided.
■
WIKA operating instructions model 116.18.02x
EN
7
Werbung
Inhaltsverzeichnis
