Replacing The Dust Bag - Grundig VCR 7230 Bedienungsanleitung

6 Cleaning and maintenance
5. Wash the water tank, dust container and filter assembly periodically with cold water as required as
per the frequency of operation.
6. Leave the water tank, dust container and filter assembly to dry after washing, and ensure that they
are completely dried.
C
Drying may take 24 to 48 hours.
7. Assemble the water tank, dust container and filter assembly after drying them and then install the
assembly to the vacuum cleaner.
A
WARNING: Do not operate the robot vacuum cleaner without installing the filter group.
Otherwise, the appliance may get damaged

6.2 Replacing the dust bag

When the dust container is full, the indicator of the dust collection station flashes in red or a notification
is displayed on the application. Replace the dust bag in a timely manner. When the dust bag is under
normal operation, the white light on the dust collection station is illuminated stationally or flashes.
Dust con-
tainer light
Raise the upper cover.
Robot Vacuum / User Manual
Pull the handle of the
dust bag upwards.
.
Discard the old dust bag
Install a new dust
bag and close the
upper cover.
55 / EN