Grundig VCR 7230 Bedienungsanleitung Seite 45

5 Operation
2. Place the appliance to the dust collection station so that it shall be aligned with the charging com-
munication pins.
5.3 Operation
For the first operation, bring the ON/OFF button on the side from "O" to "I" position. Press " " button
on the robot vacuum cleaner for 3 seconds to turn it on.
• Do not turn off the appliance using ON/OFF button directly during cleaning; otherwise the data of the
robot vacuum cleaner cannot be saved.
• If the ON/OFF button is on OFF position, the robot vacuum cleaner will be turned on automatically
when it is placed on the charging dock and turned off automatically when it is removed from the
charging dock.
• If the robot vacuum cleaner will not be used for a long period of time, bring the ON/OFF button to off
position.
Starting the cleaning
Press " " button to start the automatic cleaning mode. When it is started, the
robot vacuum cleaner is removed from the charging dock, performs an automatic
scan to create a map, determines the cleaning route in a smart way and divides the
area to several regions. The cleaning route is planned along the wall and the robot
vacuum cleaner moves forward and backward to clean different regions in order.
A
WARNING: If the charging level is too low, the cleaning cannot be started. Please charge
the appliance before starting the cleaning.
Robot Vacuum / User Manual
C
Charging starts after the lighting indicator of the
dust collection and charging station flashes 3
times and then it is turned off completely.
When the appliance is connected to the dust
C
collection station, the dust collection station
starts to collect dust. This operation lasts 15
seconds approximately.
45 / EN