Teka DHT 97670 ROS WH Bedienungsanleitung Seite 22

(**) Intensive speeds: the duration of the intensive speeds is 6 minutes after which the
electronics automatically return to 4th speed.
PL: LIGHTS ON / OFF key
Light intensity: by pressing the "PL" button for a long time with the lights on, the intensity of
the light will begin to decrease until it reaches the minimum value; releasing the button
interrupts the descent of the light intensity. Once the minimum value is reached and by
pressing the "PL" key again for a long time, the light intensity will begin to increase until it
reaches the maximum value; if released, it stops at the brightness reached.
Light Color: with the hood off and the lights off, press and hold the "PL" button until the LED
on the hood comes on to enter the dynamic light menu. With single presses of the "PL" key
you will have the variation of the color tone of the light from 2700 ° K to 4000 ° K in 10 steps.
Once the desired tone has been reached, you will have to wait 10 seconds, the LED on the
hood will stop flashing and the function will be memorized.
PC: FRESH AIR ON/OFF key
Fresh Air Activation / Deactivation: By pressing the "PC" button once you will enter on
the Fresh Air/Clean Air function menu. Then, pressing "PC" button again for a long time with
the hood off Fresh Air function will be activated (it will display a "C" on the screen). This
function allows the engine to be switched on at 1st speed for 10 minutes followed by 50
minutes of stand-by. This option remains active during a period of 24 hours. To deactivate
the Fresh Air function, press the "PC" or "P0" key again. While the function is active, both
with the engine running and in stand-by, the hood LED will flash every 5 seconds.
Clean Air Activation / Deactivation: By pressing the "PC" button once you will enter on
the Fresh Air/Clean Air function menu. Then, pressing the "PC" once the Clean Air function
will be activated (a "C" appears on the display).
When this function is activated, the motor is set at maximum speed for about 6 minutes,
at the end of the 6 minutes the motor will switch off automatically.
To deactivate this function, press the "PC" key or the "P0" key.
Note: this function can only be activated with the hood on and has priority over all the other
active motor functions.
PT: TIMER button (a "T" appears on the display)
The timer performs a 15-minute countdown and can only be activated with the engine running.
The duration of 15 minutes does not change even if the speeds are changed during the
countdown.
At the end of the 15 minutes the engine stops.
PD: Display
Buzzer activation / deactivation: by defoult the hood is supplied with the buzzer active, if you
want to deactivate, with the hood off, turn on the lights by pressing the "PL" key, then press
and hold the "PT" and "P1" keys until the switching on of the hood led without acoustic signal.
If you want to reactivate, repeat the operation described above, the LED will light up and the
acoustic signal will be emitted to confirm.
Note: To save battery power, the display remains active for about 4 seconds, after which it
turns off, to view the active functions select any key and the display is reactivated.
22