Basic Operation; Shuffle Playback - Teac CD-P1120 Bedienungsanleitung

Operations

Basic Operation

1. Press the POWER switch
2. Press the OPEN/CLOSE (∫) button.
The disc tray will slide out. Place the
disc gently on the tray with its label side
facing upward. The disc is set within the
disc guides at the center of the tray.
For 8 cm (3-inch) For 12 cm (5-inch)
CD singles Compact Discs
3. Press the OPEN/CLOSE (∫) button
again.
The disc tray will close.
Several seconds later, the following
information is displayed and the player
enters the standby mode.
Tune numbers on
disc up to 16
Total number of Total playback
tunes on the disc time of disc
4. Press the PLAY (Á) button.
Disc playback starts from the first track,
and the Á(play) indicator will light.
● During playback, the number of the cur-
rently played tune blinks on the Music
Calendar.
● When tunes have been played, their
numbers will disappear from the Music
Calendar display.
Direct access play:
Press the numeric buttons corresponding
to the required tune, and press the PLAY
(Á) button. The player starts from the
specified tune directly.
Example 1:
To play the 5th tune:
Press
.
Example 2:
To play the 21st tune:
Press
.
Even if the disc tray is open....
When the Á button is pressed:
The disc tray will close and playback starts
from the first track.
To stop play
To stop playback:
Press the STOP (∑) button. The player
enters the stop mode.
To unload the disc:
Press the OPEN/CLOSE (∫) button; play-
back stops and the disc tray will slide out,
and all functions are reset to their initial
settings.
To temporarily suspend playback
(pause mode):
Press the ƒ button. Playback stops at the
current position and the ƒ indicator lights
steadily. To resume playback from the same
position, press the Á or ƒ button.
CAUTION:
● Do not force the tray by hand during
opening and closing operations.
● Do not leave the disc tray open
when the player is not in use to pre-
vent dirt and dust from entering the
mechanism.
– 7 –

Shuffle Playback

This function is operational both at stop
and during normal playback.
1. Press the SHUFFLE button.
The SHUFFLE indicator lights up in the
display.
2. Press the PLAY (Á) button. The
indication rotates on the TRACK
display while the player is shuffling the
tunes.
3. Tracks will be randomly selected and
played back.
Notes:
● Press the / button with shuffle func-
tion engaged to select a tune at random.
Press the . button to replay current-
ly played tune from its beginning.
● A tune cannot be replayed after it has
been played in this mode.
● To release the shuffle function while it is
engaged, press the SHUFFLE button
again. Tunes will play back in their nor-
mal designated order, starting from the
currently played tune.
Intro Check Function
The Intro Check function allows only the
beginning of each track to be played for 10
seconds.
1. Press the INTRO CHECK button.
2. Press the PLAY (Á) button.
The INTRO and Á indicators will be
indicated.
3. Press the INTRO CHECK button again to
clear the Intro Check function.
● The Intro Check function also works
together with SHUFFLE and REPEAT ALL
functions. This function will not stop
until the STOP (ª) button is pressed.
● The Intro Check function also works
together with the PROGRAM function.