Basic Operation; Repeat Play - Teac PD-H570 Bedienungsanleitung

Basic Operation

1
Press the open/close (∫) button.
The disc tray will slide out.
2
Load a disc with its label side facing
up.
3
Press the disc skip button to select a
tray.
4
Load a disc only when the tray is open.
• Load another disc by repeating steps 3
and 4.
5
Press the open/close button to close
the disc tray.
6
Press the disc skip button to select a
disc.
7
Select the track you want by pressing
the music skip (Ú/Æ) button.
8
Press the play (∏) button, and the CD
will be played.
9
Press the pause (ƒ) button when you
want to pause playing.
10
Press the stop button when you want
to stop playing.
2 ,4 1 ,5 3 ,6
8 7
Note
This unit will automatically start playing in
the following cases:
• When you select CD on the amplifier
(A-H500).
• When you turn the system on with the
amplifier's input selector set to CD.
∑ Last position memory function
If the program button is pressed during
normal play, the player will revert to a
position at which the stop button was
previously pressed. Then, the playing will
restart from that particular position.
_ 8 _

Repeat Play

(You can use this function only with the
remote control unit.)
∑ ONE-repeat play function
• Press the 1/ALL repeat button once.
– Only the current track is played
repeatedly.
* If you select other tracks during ONE-
repeat play, the track selected last will
be repeated.
∑ 1 Disc-repeat play function
9
• Press the 1/ALL repeat button once
more.
– All the tracks on a disc are played
repeatedly.
* When the tracks are programmed, only
the programmed tracks will be repeated.
∑ All-Disc repeat play function
• Press the 1/ALL repeat button once more
in the status of 1 Disc repeat mode.
– All the discs loaded in the disc tray
continue to play repeatedly.
• Press the button once more to cancel
the TTL repeat play function.
∑ A-B repeat play function
(1) During play, press the A-B repeat
button at the desired start point (A).
– Then "A-" will be displayed and "B" will
blink on the display.
(2) Press the button again at the desired
end point (B).
– Then "A-B" will be displayed and only
A-B section will be played repeatedly.
(3) Press the button once more to cancel
the A-B repeat play function.