Using Further Nozzles (Accessories) - Royal Dirt Devil EQU Bedienungsanleitung

2 Unpacking and assembling
2.3 Using further nozzles
(accessories)
5
6
7
26
Besides the floor nozzle you just attached, you may extend
the functions of your cylinder vacuum cleaner with other
nozzles.
The supplied accessories include:
- Crevice nozzle (Fig. 5/1)
For vacuuming spots difficult to reach.
- Furniture brush (Fig. 5/2)
For cleaning delicate surfaces.
- Upholstery nozzle (Fig. 5/3)
For gentle vacuuming of upholstered furniture.
Optionally available are:
- Turbo brush (Fig. 6/1)
For thoroughly deep cleaning of carpets with the
revolving brush head.
NOTE:
The brush rotating at high speed causes a loud noise
during operation.
- parquet brush (Fig. 6/2)
For vacuuming especially delicate surfaces (e.g.
parquet, laminate) with long, soft bristles.
This is how to attach the nozzles:
WARNING:
Danger of injury! Only assemble the appliance if it is not
connected to the power supply. Otherwise the machine
might start up and parts of your body, hair or pieces of
clothing might be sucked in.
ATTENTION:
Use only intact nozzles. Damaged nozzles may scratch
or damage surfaces and objects.
1. Switch off the vacuum cleaner and pull the plug from the
mains socket.
2. Pull off the attached nozzle.
3. Attach the desired nozzle to the bottom end of the
telescopic tube (Fig. 7/1) or if necessary directly to the
handle.
ATTENTION:
Using the cylinder vacuum cleaner without a nozzle
attached increases the danger of accidentally sucking in
objects.
4. If possible, store nozzles no longer in use on the
accessory bracket (Fig. 1/3).