Io-Link Interface - Balluff Bos R254K-Uui-Lh10-S4 Betriebsanleitung

BOS R254K-UUI-L_1_-S4
Photoelectric Sensors
7

IO-Link interface

The IO-Link device supports the functions listed in this
chapter.
For further information, see document IO-Link
configuration under www.balluff.com on the
product page.
Primary functions
– Identification
– Device Discovery
– Optical Frontend
(not for BOS R254K-...-LS10-...)
– Switching Profiles
(not for BOS R254K-...-LS10-...)
– Transmitter Lifetime Info
(not for BOS R254K-...-LE10-...)
– Sensor Operating Modes
(not for BOS R254K-...-LS10-...)
– Teach-In 100% Reference
(only BOS R254K-...-LE10/LK10-...)
– Automatic Switching Threshold Adaption
(only BOS R254K-...-LE10/LK10-...)
– Switching Threshold Presetting
(only BOS R254K-...-LE10/LK10-...)
– Signal Quality
(not for BOS R254K-...-LS10-...)
Secondary functions
– External Signal Blanking
(not for BOS R254K-...-LS10-...)
– Signal Delay
– Signal Speed Monitor
– Switching Counter
– Basic Statistics
– Logic Blocks
– Operating Hours Counter
– Boot Cycle Counter
– Voltage and Current Monitoring
– Extreme Environment Status
– Internal Temperature
– Inclination and Installation Aid
– Vibration
– Humidity
– Storage Usage Monitoring
10 english
System functions
– Device Status and Detailed Device Status
– Diagnosis Suppression
– Reset Commands
– Variant Configuration
– Pin Assignment
– LED Meaning and Configuration
– Process Data Info and Configuration
– Profile Characteristic
– Device Access Locks
– Parameter Manager