Renkforce IR2 Bedienungsanleitung Seite 47

"Configuration"
"Display"
Here, you can set whether the display is to be in colour ("Color") or black and white ("Mon-
ochrome").
"Power Management"
Here, you can set the power saving mode. You can choose between the following times: Off,
5, 15 or 30 minutes.
"Sleep Timer"
This menu item configures the sleep timer. If you enable it (a time must be selected), the ra-
dio will switch off automatically after the chosen time. You can choose the following times:
15, 30, 60, 90, 120, 150 or 180 minutes.
"Buffer"
You can choose an interim storage buffer of 2, 4 or 8 seconds for the radio stations here.
This means that, e.g., 2 seconds will be saved before the station is played back.
"Weather"
"Local Radio Setup"
Here, you can adjust the automatic selection for the menu item "Local Radio". You can
leave the selection to the Internet Radio ("Auto Detect") (standard). You can also adjust
selection manually. In this case, either select "Manual Setup (Country)" if you want to limit
selection to one country, or select "Manual Setup (City)" if you want to limit selection to one
town. To accept, confirm "Save as Local Radio" with the C13/A8 button.
"Show on Standby"
Here, you can select if the weather display is to be shown in standby. If you enable
the function, the display will switch between time and weather display.
"Temperature Unit"
Here, you can switch the temperature display between Celsius (°C) and Fahrenheit
(°F).
"Set Location"
Select the town for which you want to display weather data in standby. First select the
desired continent, then the country and last the town. To add this to the display, push
the button C13/A8 or C12/A9 (arrow to the right) while the weather for the current town
is displayed. Then confirm twice with the C13/A8 button.
47