Renkforce IR2 Bedienungsanleitung Seite 45

"Bluetooth"
With this menu item, you can switch the radio to Bluetooth
is also active. A brief sound is played as confirmation. For this, observe chapter 10 e) of these instructions.
"Configuration"
"Manage my mediaU"
Here, you can put together your own station list online. For this, observe chapter 10 h) of
these instructions.
"Network"
"Date&Time"
"Wired Network Configuration"
In this menu item, you can turn the wired network on and off.
"Wireless Network Configuration"
In this menu item, you can search for wireless access points and connect your radio
with the chosen one. In principle, the configuration is like selecting "YES" for the
network configuration and then "Wireless" in chapter 9 (Initial Setup).
"Wireless Network (WPS PBC)"
Here, you can enable the WPS function of your radio to connect it to your router. The
configuration is like selecting "Yes(WPS)" for the network configuration.
"Manual Configuration"
If there are any problems with automatic setup of the network, you can configure
the wired or wireless network manually here. You can choose if the IP address is to
be procured automatically (DHCP). You can enter the SSID if it is invisible. You can
also switch between the already-saved WiFi networks "Manage".
"Check Network when Power On"
In the last item of this submenu, you can switch the automatic network check when
turning the radio on off and on.
"Set Date and Time"
Here, you can choose first whether the time, date and time zone, incl. automatic
switching from summer to winter time, is to be set automatically ("Auto Detect") or
whether you want to set the time and date manually ("Manual Setup").
In the second case, select "Manual Setup". To change the setting, use either the
buttons 0 to 9 (D0 - D9) or the four arrow buttons (C9 - C12).
mode. Once the display shows "Bluetooth", it
®
45