ECOVACS AIRBOT Z1 Bedienungsanleitung Seite 33

No. Problem
13 Air Quality Monitor is off.
The data detected by
Air Quality Monitor is
inconsistent with AIRBOT.
14
The value displayed by
Air Quality Monitor is not
consistent with the value
displayed by AIRBOT.
Air Quality Monitor cannot
15 connect to ECOVACS
HOME App.
AIRBOT starts Linked
16
Purification unexpectedly.
Possible cause
Air Quality Monitor is not connected to power.
Air Quality Monitor is in poor contact with
the USB cable, or the USB cable is in poor
contact with the USB port.
The data may be different. It is normal for
PM2.5 to differ ±10µg/m and within one value
for VOC.
The values detected by AIRBOT and Air Quality
Monitor in the same space may be different.
The difference of PM2.5 is ± 10µg / m , and the
difference of VOC is normal within one level.
Incorrect home Wi-Fi username or password
entered.
Air Quality Monitor is not within the range of
your home Wi-Fi signal.
The network setup started before Air Quality
Monitor is ready.
Air Quality Monitor does not support 2.5 GHz
Wi-Fi.
Incorrect App installed.
When Air Quality Monitor detects the air pollution
exceeding the standard, AIRBOT will immediately
go to the purification area bound with Air Quality
Monitor to start Linked Purification.
Solution
Air Quality Monitor must be used with the power
connected. Please plug in the USB cable and
connect it to a USB port.
Make sure that Air Quality Monitor is connected to
the power supply.
This is normal behaviour. Allow AIRBOT to purify
regularly to ensure that the air is sufficiently purified,
and the deviation will be reduced accordingly.
This is normal behaviour. Allow AIRBOT to purify
regularly to ensure that the air is sufficiently purified,
and the deviation will be reduced accordingly.
Enter the correct home Wi-Fi username and
password.
Make sure Air Quality Monitor is within range of your
home Wi-Fi signal.
Press and hold the Function Button to get Air Quality
Monitor ready for network setup.
Make sure Air Quality Monitor has been connected
with 2.4 GHz Wi-Fi network.
Please download and install ECOVACS HOME App.
If there is no need for AIRBOT to purify in certain
periods, please set Do Not Disturb period in
ECOVACS HOME App.
EN
33