ECOVACS AIRBOT Z1 Bedienungsanleitung Seite 20

In-situ Purification.
2
Press to turn on default In-situ Purification.
AUTO
Short Press
Mobile Purification
3
Press twice to switch to Mobile Purification. You also can switch
mode by voice control.
* Make sure AIRBOT stays connected to the Charging Dock and keeps
charging before the first Mobile Purification. When purification is
enabled, AIRBOT will firstly explore the home environment to create a
map. Please do not follow in case of affecting AIRBOT's recognition
of the surrounding environment.
AUTO
Press Twice
EN
20
Mode and Airflow Switch
4
You can switch on Airflow in ECOVACS App or by voice control.
Turn on Air Freshening/UV Sanitizing
5
Turn on Air Freshening/UV Sanitizing via ECOVACS HOME App.
6 Bind Purification Areas through Air Quality Monitor
Air Quality Monitor can monitor the real-time air quality and call for
AIRBOT to turn on Linked Purification.
Scan the QR Code on the Air Quality Monitor. Complete the network
setup according to the instruction. Then, return to AIRBOT main screen
in ECOVACS App and enter into "Map Management --- Air Quality
Monitor" to select the corresponding purification area to complete the
binding.
Note:
The PM2.5 value and VOC value will be displayed in the App after
binding.
* Click the unbinding button in the App to complete unbinding the Air
Quality Monitor.
* You can use several Air Quality Monitors to monitor the air quality of
more rooms. If necessary, please visit https://www.ecovacs.com/global.