Werbung
Verfügbare Sprachen
Verfügbare Sprachen
See chapter "Application examples" for an example of how to route the hose
lines from the product to the tank to be monitored.
Verify that the ose lines are resistant to the stored liquid and its vapours.
1. Use oil- and water-resistant plastic hoses 6 x 2 mm for the measuring
hose (red), the suction hose (transparent or white) and the exhaust hose
(green).
- When the leak detector of existing systems is replaced, you may also
use 4 x 2 mm hose lines provided such hoses had been used before the
leak detector is replaced.
- The hose connections of the product are designed for 4 x 2 mm and
6 x 2 mm hose lines.
2. Plug the EnOcean® wire-
less module into the slot.
When plugging in the
wireless module, ensure
the following:
- All pins must be inserted
into the female connec-
tor.
- The position of the
antenna must be at the
right side (close to the
housing wall).
3. Push the antenna of the
EnOcean® wireless mod-
ule into the two housing
openings of the product.
4. Close the cover of the
product.
Eurovac HV
EN
Werbung
