Maintenance Plan - Storch 160 PRO Bersetzung Der Originalbetriebsanleitung

Troubleshooting
Fault Cause
Pressure Air in suction hose
fluctuations
Not enough water supply
Water filter is clogged up
High pressure nozzle blocked / worn
Suction height exceeded
Foam Sprayer Detergent used is non-foaming
Nozzle on suction hose is clogged up
or filled with dried out soap
Foam sponge in foam Sprayer is clogged up
Detergent tank empty
Motor does Power cable broken
not start
Plug is not inserted in mains
Mains fuse is blown
Plug has a loose connection to cable
The pump is blocked or frozen
The thermal protector is activated

Maintenance plan

Weekly
Checking oil level/
tip up
Changing pump oil
First time after 50 operating hours
X
Contact dealer / service dpt.
Remedy
Fill hose with water and connect again
Stop! Until appropriate water mains or hose
reflect pump Qmax
Rinse the water filter
Clean or replace the nozzle with same size
Stop! until max suction height is present as
specified
Use only detergents with foaming agent.
Rinse detergent limiter / flush with
tempered clean water
Rinse / soak foam Sprayer in tempered water for
8 hours or more or dismount front of foam Sprayer
and exchange / rinse the SS foam sponge with a
new
Top up detergent tank
Contact professional electrician for replacement
of power cable
Insert plug
Reset power mains
Repair / reassemble plug on cable
- skilled electrician
Stop! Unfreeze pump or contact dealer service
department
Stop! Cool off machine for at least 5 minutes
Every 200 operating hours
Contact dealer / service dpt.
69 Original instruction