Cleaning And Disinfecting; Metal And Plastic Surfaces - Sport-Tec LOJER DOPPELZUGAPPARAT SPEED PULLEY 100 Bedienungsanleitung

Instructions for use

Cleaning and disinfecting

Remove all accessories from the Pulley before cleaning it. Remove stains as
soon as possible.
Clean the device regularly to ensure all surfaces of the Pulley stay in good
condition. Always carry out cleaning/disinfection when the patient changes. Clean
the Pulley more thoroughly once a month. Make sure that you also follow any
facility/hospital-specific instructions when cleaning/disinfecting the Pulley.
When cleaning a Lojer Pulley, use protective glasses and gloves. If eye
or skin contact/irritation occurs, rinse with plenty of water and contact a
physician.
When doing a normal cleaning, give the Pulley a quick inspection of
movements and a visual inspection.
7.1

Metal and plastic surfaces

Clean the Pulley's metal and plastic parts using a damp wipe or a brush with mild
detergent. Use a small brush to reach small spaces. If necessary, rinse the
surfaces with clean water and dry them thoroughly. Avoid excessive use of
liquids.
Follow the manufacturer's instructions when using and diluting a disinfectant
(alcohol/chlorine). Allow the disinfectant to evaporate at room temperature.
Plastic surfaces (ABS, HDPE, PP) are highly resistant to different chemicals.
Plastic is resistant to bleaching agents (alkaline compounds). Dilute organic or
inorganic acids. Different solvents and cleaning agents may also be used (check
the product leaflet for concentrations that are safe to use).
Plastic surfaces may get damaged if they are exposed to aromatic hydrocarbons
(benzene and its derivatives), ketones, ethers, esters, and chlorinated
hydrocarbons. Keep in mind that plastic might also deteriorate if it is exposed to
several chemicals at the same time.
Stainless steel is highly resistant to chemicals. Clean stainless-steel surfaces
using a mild detergent solution. Ammonia and most solvents can be used to
remove difficult stains. Avoid chlorine-based solutions.
Painted or chrome-plated surfaces can be cleaned using a mild detergent. These
surfaces are also highly resistant to chemicals. Avoid using harsh detergents and
cleaning products.
All surfaces need to be dry and clean before and after use.
Clean the Lojer Pulley after all accessories/parts are removed and do a
more thorough cleaning once a month or according to facility instructions.
Disinfect and perform a basic cleaning on the Pulley after every use.
Copyright © Lojer Oy, 2021
Lojer Pulleys for Medical Training Therapy / Version 4.0
21