Instructions for use
Acceptance inspection and storage
Check the packaging for damage to ensure the product has not sustained any
damage during transport. Remove all packaging materials, including any
supporting pieces used during transport.
The shipment must include all the items listed on the packing slip. If any defects
or missing items are noticed, contact the product's supplier immediately.
Image 4. Symbols and limit values for transport and storage temperature,
Check that the transport packaging is intact and the Pulley is clean.
The transport package is not evenly distributed. The heavier weight
stack side is marked with a yellow label. Lift with caution to avoid the
package falling over.
The Pulley must be stored at temperatures between -10 and +60 °C,
with relative humidity between 30 and 75 % and atmospheric pressure 80
kPa to 106 kPa.
Copyright © Lojer Oy, 2021
Lojer Pulleys for Medical Training Therapy / Version 4.0
humidity and atmospheric pressure.
6