Inspection Form - Sport-Tec LOJER DOPPELZUGAPPARAT SPEED PULLEY 100 Bedienungsanleitung

Instructions for use

Inspection form

ANNUAL INSPECTION / ANNUAL MAINTENANCE PROCEDURES
SERVICE TECHNICIAN AND DATE:
NEXT MAINTENANCE:
PRODUCT SERIAL NUMBER:
VISUAL INSPECTION:
MAINTENANCE AND
INSPECTION:
FUNCTIONAL TESTING
AND INSPECTION:
A) CHECK FOR ANY POSSIBLE DAMAGE; FRACTURES, DEFORMATIONS, SIGNS OF UNUSUAL WEAR.
B) CHECK THE TIGHTNESS OF ALL SCREW FASTENINGS AND THE FASTENINGS OF ALL COMPONENTS, TOLERANCES
AND MECHANISMS IN GENERAL
C) FUNCTIONAL TESTING, ALSO UNDER LOAD
D) CHECK THE HOLD OF ALL TRANSPORTATION WHEELS, THE GENERAL CONDITION OF THE WHEELS ETC.
E) CHECK THE FUNCTIONALITY OF THE ADJUSTMENTS AND THEIR LOCKS.
F) SUITABLE LUBRICANT E.G. WURTH HS 2000 SYNTHETIC SPRAY VASELINE OR SIMILAR.
G) REPLACE DEFECTIVE COMPONENT, MAKE NOTIFICATIONS IF NECCESSARY FOR PARTS UNDER WARRANTY.
Z) RECORD ALL REQUIRED REPAIR WORK, PART REPLACEMENTS ETC.
Y) INSPECT CONDITION AND ATTACHMENT OF MARKING- AND WARNING STICKERS OF THE DEVICE AND ACCESSORIES.
Copyright © Lojer Oy, 2021
Lojer Pulleys for Medical Training Therapy / Version 4.0
________________________________________
________________________________________
________________________________________
FRAME STRUCTURE
ROLLER FRAMES AND ADJUSTMENT TUBE
WALL MOUNTING POINTS
ROPE AND HOOK FASTENINGS
MARKING – AND WARNING-STICKERS
CHECK BOLT TIGHTNESS
HANDLES, ROPES AND WHEELS
SLIDE BARS
WHEELS, WHEEL LIFTING MECHANISM AND
SURFACES
CLEANING/WASHING OF STRUCTURES
HOOK, ROPE AND WHEELS
DRAW HEIGHT AND ROPE LENGTH ADJUSTMENT
LOCKS
WEIGHT STACK
LIFTING PEDAL AND TRANSPORTATION WHEELS
ROLLER FRAMES AND ADJUSTMENT TUBE
ACCESSORIES
PROCEDURE OK
A, B
A, B
A, B
B, C
Y
B
B, C
C, F
D, F
WHEN NEEDED
A, C
B, E, G
A, Y
A, E
A, B, C, F
A, B, C, G, Y
29
Z) REPAIR