Transporting Mobile Speed Pulley - Sport-Tec LOJER DOPPELZUGAPPARAT SPEED PULLEY 100 Bedienungsanleitung

Instructions for use
A set of tools that are needed for the mounting are presented in the table below.
1 Screw/concrete anchor (compatible with the wall material)
2 Impact drill
3 Ratchet/wrench
4 Spirit level
5 Marker
6 Tape measure
Table 4.
The mounting of the device should be carried out by a qualified person
to ensure safe use of the device.
Check your wall for stability before mounting the device. Use
appropriate platform reinforcement when necessary to create a safe and
stable mounting surface.
Before mounting the device, check that there is enough space in front of
the wall to ensure safe use.
Make sure that you have the correct screws and/or anchors for the
mounting and that they are compatible with the wall material.
The stable mounting of the device should be checked by trying to move
the device in all directions.
6.3

Transporting Mobile Speed Pulley

When using the device, make sure that the locking pedal is up and the device is
standing on its legs with wheels lifted up. If you want to move the device, unlock
the wheels by pressing the pedal down and lifting the device up to its wheels (look
at Image 15). When moving the device, push/pull it from its frame or back support.
Avoid touching the lubricated parts.
LOCK
UNLOCK
Image 15. Locking pedal
Copyright © Lojer Oy, 2021
Lojer Pulleys for Medical Training Therapy / Version 4.0
Mounting tools
16