Service; Biannual Procedures - Sport-Tec LOJER DOPPELZUGAPPARAT SPEED PULLEY 100 Bedienungsanleitung

Instructions for use

Service

Lojer Pulleys need little maintenance, because the Pulley doesn't include any
electrical parts and its moving parts are lubricated. When the instructions for
normal use and cleaning are followed, the lubrication should not wear off.
However due to wearing caused by the use of the Pulley, maintenance lubrication
should be conducted annually as is instructed.
The expected lifetime of the Pulley and its' accessories is at least 10 years,
provided that the Pulley and accessories has been used and maintained
according to the manufacturer's instructions. Inspect the device visually every
day and look for any faults, deformation or wear. Inspect all ropes, straps and
their connections. Faulty Pulley should not be used. All original spare parts for
the Pulley are available from the manufacturer, and we recommend replacing any
broken or worn parts.
Service technicians must always read the instructions for use before
carrying out service/repair work, and they must obey safety instructions
when working.
The Holder is responsible to ensure that only trained or adequate
qualified person is authorized to service or repair the device. Maintenance
work carried out by an unauthorized person may cause personal injury or
damage to the device, for which the manufacturer is not responsible.
Use only original spare parts, available from the manufacturer, and
follow the manufacturer's guidelines.
Check that the Pulley is working properly after each maintenance/repair
procedure.
Document all maintenance work. In accordance with our warranty terms
and conditions, insufficient maintenance may also cause the warranty to
lapse.
8.1

Biannual procedures

Biannual maintenance procedures are mainly routine checks carried out by the
user. At least every six months, check that the following parts and features are
working properly. Carry out functional testing when it is instructed.
Test the mechanism's movement and observe any unusual sounds, vibrations,
etc. Also pay attention to stability, unusual wobbling of mechanisms, looseness,
etc. Perform the following actions for the listed items:
• Rope and Carabiner hook (functional testing)
• Roller frame's adjustment functions (functional testing)
• Mobile Speed Pulley's transportation wheels (functional testing)
• Rope wheels (functional testing)
Copyright © Lojer Oy, 2021
Lojer Pulleys for Medical Training Therapy / Version 4.0
23