Application Examples And Configuration; Main Unit And Secondary Unit Operating Mode - Siemens 7XV5662-0AC02 Handbuch

Application Examples and Configuration

3.1 Main Unit and Secondary Unit Operating Mode

3.1

Main Unit and Secondary Unit Operating Mode

The CC-CO is configured via jumpers. All jumpers are plugged in to position 2-3 ex works. All communication
converters are therefore preconfigured as the main unit.
For normal operation, a communication converter must be configured as the main-unit device and the 2nd
CC-CO as the secondary-unit device. If you want to reconfigure the device to a secondary-unit device, plug the
jumper M/S into position 1-2.
[dw_jumper_M-S, 1, --_--]
Figure 3-1
(1) M - Main unit
(2) S - Secondary unit
20
CC-CO Configuration
Accessories, Communication Converter - Copper/Synchronous Interface, Manual
C53000-B1174-C190-1, Edition 01.2022