Inhaltsverzeichnis
Werbung
Inputs
Input resolutions
Control
Power requirements
Power consumption
Noise level (typical at 25°C/
77°F)
Operating temperature
Airflow requirements
Exhaust airflow
Operating humidity
BTU per hour
Dimensions (WxLxH)
Weight
Shipping dimensions
(WxLxH)
Shipping weight
Storage temperature
Storage humidity
Accessories
Certifications
Warranty
*
Additional hardware required please contact an authorized Barco
representative for details
1 x HDMI 2.0a (HDCP 2.2), 1 x HDBaseT (HDCP 1.4), 2 x dual link DVI-D,
2 x Display Port, 12G-SDI
1 x RJ45 Ethernet, RS232, 3 x USB, DMX in/out*
VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
Up to 2,560 x 1,600 @ 120Hz
IR, RS232, TCP/IP, 3 x 12v Trigger* (requires firmware release 1.6
onwards)
Driver modules available for: Crestron, Control4 and Savant
100 - 240V / 50 - 60Hz
950 W Nominal / 1100 W Max.
35 dB(A)
10 to 45 °C (sea level)
Air Inlet (from Rear w/Feet Down): Left Side
Exhaust (from Rear w/Feet Down): Right Side
Clearance Distances (Front / Left / Right / Rear): 1cm / 50cm / 80cm /
20cm
221 ft3/min @ 22.9 °C
20 to 80% (relative humidity)
Max. 2,900 BTU/h
480 x 680 x 227 mm (excluding lens)
18.9 x 26.7 x 8.9 in. (excluding lens)
25.5 kg / 56.2 lbs (excluding lens)
920 x 700 x 700 mm (excluding lens - packaged separately)
36 x 27 x 27 in. (excluding lens - packaged separately)
42 kg / 92 lbs (excluding lens - packaged separately)
-20 to 60 °C
10 to 90% (relative humidity)
Power cord(s), wireless remote control
FCC Class A
Limited 3 years parts and labor
Extendable up to 5 years
Firmware upgradable
Please contact an authorized Barco representative for details
Technische Daten
R5906140DE /03
Medea
125
Werbung
Inhaltsverzeichnis
