Getting Started; Power Off - SPL DeEsser Mk2 Bedienungsanleitung

DeEsser Mk2

Getting started

Read the safety instructions starting on page 7.
Make sure that the mains voltage of the DeEsser Mk2 mentioned in the specifications
(page 14) corresponds to the voltage of your region.
The power switch on the back of the DeEsser Mk2 must be in the off position.
(Off = O / On = I).
Connect the supplied power cord to the power connector of the DeEsser Mk2 and to a
power outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
The devices that are to be connected to the DeEsser Mk2 must be be switched off.
Connect your devices to the inputs and outputs of the DeEsser Mk2 using appropriate
audio cables (XLR, TRS).
Audio cables not included in the scope of delivery.
Power on
Switch on the power switch on the rear panel of the DeEsser Mk2 (On = I).
The PWR LED and all activated switches light up.

Power off

Switch off the power switch on the rear panel of the DeEsser Mk2 (Off = O).
The PWR LED and all activated switches will no longer light up.
2
Mains input
Power switch
Voltage selector
Fuse
DeEsser Mk2
EN
DE
Input
Output
PWR LED
3