Cleaning And Maintenance - Silvercrest SMZT 500 A1 Bedienungsanleitung

3) Insert the blade holder 5 with the emulsifying disc 6 onto the bearing 9 .
4) Add the cream .
5) Close the bowl 8 with the connecting piece 4:
–
Place it onto the bowl 8 so that the tabs on the outer rim of the connecting
piece 4 grip into the catches on the bowl 8 (see figure 1) .
–
Then turn the connecting piece 4 so that the tabs slide down into the
catches .
6) Place the motor unit 1 onto the connecting piece 4 . Make sure that the tabs
on the inner edge of the connecting piece 4 grip into the recesses on the
motor unit 1 and that the motor unit 1 sits firmly in place .
7) Press the speed button I 2 .
NOTE
► To whip cream, you should make sure that it is well chilled before whipping
(max . 8°C/fridge temperature) .
► For 100 ml of cream, we recommend a whipping time of around 30 seconds
at normal speed .
► For 200 ml of cream, we recommend a whipping time of around
30 – 50 seconds at normal speed .
► The whipping time can vary depending on certain factors, e .g . fat content
or the ambient temperature . Keep an eye on the cream while you are
whipping it and adjust the whipping time to fit your needs .

Cleaning and maintenance

WARNING! RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains power socket before cleaning the
appliance .
You must never immerse the appliance in water when cleaning it or hold
it under running water .
WARNING! RISK OF INJURY!
► Handle the extremely sharp blade 7 with caution as it can cause injuries .
Reassemble the appliance after using and/or cleaning it so that you do not
injure yourself with the exposed blade 7 . Keep the blade 7 out of the
reach of children .
CAUTION! PROPERTY DAMAGE!
► Do not clean the motor unit 1 in the dishwasher as this will damage it .
■ Remove the power plug from the socket .
SMZT 500 A1 GB │ IE │ NI │ 11 ■