Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
˜ Switching on and off
Switching on
Activate the safety lock-out
that position.
Press the on/off switch
is running, release the safety lock-out
Switching off
Release the on/off switch
m
CAUTION! RISK OF INJURY!
Always wear protective gloves when
handling or working with the product.
m
CAUTION! RISK OF INJURY AND
DAMAGE TO PROPERTY!
Wear gloves when handling the saw blade.
u
In this way, you avoid injury from cuts.
Do not use any blunt or bent blades or
u
blades which are damaged in any other
way.
Before sawing the workpiece, check for
u
hidden foreign objects such as nails,
screws. These must be removed.
Always insert a suitable saw blade.
u
Secure the workpiece with the aid of
u
clamping devices on the workbench.
Apply only as much pressure as is required
u
for sawing. If there is excessive pressure,
the sawing blade may bend and break.
Switch the product off immediately if the
u
sawing blade jams.
Spread the saw cut out and pull the blade
out carefully.
Always stand to the side of the product
u
when working.
Always make sure that the workplace is
u
well ventilated.
Avoid over-stressing the product while
u
working.
22 GB/IE/NI
and keep it in
[
2 ]
. Once the product
3 ]
[
.
2 ]
[
.
3 ]
[
˜ Selecting the cutting depth
NOTE
We generally recommend setting the
u
cutting depth to approx. 2 mm more than
the thickness of the material. This ensures
that you achieve a clean cut.
Let go of the quick-release lever of the cutting
depth pre-selector
Set the desired cutting depth on the scale
Clamp the quick-release lever tight again.
˜ Fitting the rip fence
Loosen the screw for the rip fence
base plate
.
[
7 ]
Insert the rip fence
slot
. Retighten the screw for the rip
[
]
fence
.
[
]
˜ Handling the circular saw
Place the product on the material. If
necessary, align the product with the rip
fence
or on a marked line.
[
]
Activate the safety lock-out
that position. Press the on/off switch
Press the product forward to lower the circular
saw. You can now release the safety lock-out
.
[
2 ]
Saw by applying moderate pressure.
.
9 ]
[
on the
[
]
into the rip fence
[
]
and keep it in
2 ]
[
.
3 ]
[
.
8 ]
[
Werbung
Inhaltsverzeichnis
