System Information - Palazzetti ECOFIRE IDRO Anleitung

Configuration 2 and 5:
To set the restart delta value:
a) Use the arrow buttons
b) Use the
c) Select submenu
d) The value will flash; change it using the
e) Press the
Configuration 3 and 4:
To set the restart delta value:
a) Use the arrow buttons
b) Use the
c) Select submenu
d) The value will flash; change it using the
e) Press the
10.7 MANUAL ACTIVATION OF THE LOAD SYSTEM
In case of first use (pellet tank initially empty) or to test operation of the load unit, manual activation of loading
is possible.
On the control panel of the stove:
a) Using the arrow keys
b) Select password "7" with the key
c) Scroll with the key
d) Select password "54" with the key
e) Holding the key
f) Releasing the key will end the load operation.
Attention!
• This function is only active when the stove is off and cold.
• Before switching on again, ensure that there are no pellets in the grate.

10.8 SYSTEM INFORMATION

Thanks to this function, it is possible to access the system information:
a) Using the buttons
b) select the password "7" with the
c) select the submenu
d) select the password "54" with the
At this point, it will be possible to use the keys to move between the values of the sub-menus in the following
order:
• pellet consumed [kg] ;
• instantaneous power [kW] ;
• energy produced [MWh];
• instantaneous power consumption [dW];
• Seasonal Energy Efficiency [%] (Ecolabel) (factory setting); Seasonal Energy Efficiency [%] (Ecodesign) (factory
setting).
56
to go to the setup menu
button to select the password "7" and then press
to confirm;
[8]
and press
button to confirm the set value.
to go to the setup menu
button to select the password "7" and then press
to confirm;
[8]
and press
button to confirm the set value.
navigate to the set-up menu
and select sub-menu
the load system will activate and the display will show the incremental bars
go to the setup menu
and confirm with the
[39]
004772533 - 16/03/2021
and then press
and buttons (
and then press
and buttons (
and confirm with the key
[3 1 ]
;
and confirm with the key
and confirm with the button
key and confirm with the
key;
key and confirm with the
;
to confirm;;
0,5 ... 5,0
°C);
;
to confirm;;
0 ... 40
°C);
and press the key ;
;
;
;
key;
key.