Preliminary Operations; Power Supply; Initial Settings; Time And Date Setting - Palazzetti ECOFIRE IDRO Anleitung

8 PRELIMINARY
OPERATIONS
8.1 LOADING THE PELLETS
The first operation to be performed before starting
the appliance is to fill the hopper with fuel (pellets).
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets. A safety switch (just for
the models that are equipped with it) makes sure
that the pellet tank lid has been closed properly (IS
in fig. 8.1) and triggers a stove alarm in case the
pellet tank lid stays open for more than one minute
while the stove is still working.

8.2 POWER SUPPLY

Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
"I" (Fig. 8.2). If the connections are correct the stove
will emit a series of intermittent beeps, the display
will come on.
If not using the appliance for an extended period,
the switch at the rear of the stove should be moved
to position (O).

8.3 INITIAL SETTINGS

Current date and time need to be set before using
the stove.

8.3.1 Time and Date setting

To set the date:
a) Use the
b) Use the
c) Use the
d) The hour value will flash; set the value using the
e) The minutes value will flash; set the value using the
f) The day value will flash; set the value using the
g) The month value will flash; set the value using the
h) The year value will flash; set the value using the
i) The current weekday value will flash (Monday = 1... Sunday = 7); set the value using the
to confirm the settings.
j) Press
50
buttons to go to the setup menu
button to select the password "7" and then press
button to scroll to and select submenu
004772533 - 16/03/2021
and press ;
to confirm;
to confirm;
[3]
and press
buttons and press
buttons and press
buttons and press
buttons and press
buttons and press
IS
Fig. 8.1
Fig. 8.2
;
;
;
;
;
buttons;