DHC BT2400 Pro Benutzerhandbuch Seite 8

6V AND 12V BATTERY TEST
1. Select "Battery Test" from the
main menu.
2. Enter VIN via the barcode
scanner or manually.
Scan:
Select the QR code icon.
Point the scanner at the
barcode or QR code, VIN
will be automatically
entered.
Select "NEXT" to proceed.
Manual input:
Press ENTER when the
input area is highlighted to
initiate the virtual keyboard.
Type in the VIN and select
" " to close the virtual
keyboard.
Select "NEXT" to proceed.
Note:
Highlight the "X" icon and press ENTER to clear the input area.
Skip the process by directly selecting "NEXT".
Invalid VIN warning will pop up if the VIN does not meet requirements in
terms of length or character. Select "Yes" to continue without modifying
the VIN. Select "No" to return and reenter the VIN.
3. Select "SETUP" to edit the battery testing criteria. (Testing criteria will be
stored after each test, select "START" to reuse previous settings.)
4. Select battery type. (available types: FLOODED, AGM FLAT, AGM SPIRAL,
VRLA/GEL, EFB.)
5. Select rating. (available ratings: CCA/SAE, DIN, EN, EN2, IEC, JIS, CA/MCA)
8